Leak Detector & Shutoff-1/4" Push Fit

MET-OT-0020 Water Leak Detector & Shutoff-1/4" Push Fit
Free Shipping available in United Kingdom

In Stock

£23.94 inc-VAT


Leak Detector for use with Water Filters, Water Dispensers & Horticultural/ Agricultural processes. This highly sophisticated unit is the best available on the market manufactured by the highly respected Taiwanese company Savant who are a specialist water control company. It operates at a higher pressure of 6 bar and a maximun water temperature of 80c

This device if installed correctly will turn off your water the moment a leak is detected. A leak detector is a normal requirement of your insurance company if you are in a multi-storey office block.

Please note this is not just a leakage alarm. If installed in the water supply close to a leaking appliance it will automatically turn off the water supply to it.

Fit the battery provided in the battery enclosure.
Connect the water control valve in the water entering your appliance.
Place the alarm unit with the metal contact touching the area you wish to protect from leaks
The connecting cable between the Alarm Module and Water Shut Off Valve is 1.5m.

If you need any further help or advice please call Vyair on 01507 524576. For simple technical information please refer to the Manufacturers Information Sheet above.


  • Water Leak Control with auto shut off and alarm
  • Low Battery Power Alert
  • Battery operated- 9 Volt battery (SUPPLIED)
  • 1/4"NSP thread Inline Water Connections
  • supplied with 2 x 1/4" Push-fit Fittings to allow option of 1/4" (6.35mm) water ppe
  • Maximum water operating pressure 6 Bar - approx 84psi
  • Full Specification Sheet is below.
  • This Meter is Manufactured By the Reputable Taiwanese company Savant Electronics, who specialise in this type of equipment
Inc.VATShow Ex.VAT
Your Shopping Basket
No Items In Basket
Total : £0.00
Need some help?
Call 01507 524576

Easy Product Finder
Page displayed in:0.1875seconds.