20"Pre Filters Water Fed Pole

POLE 2x20" Filters

Pre-Filters for Reverse Osmosis Water Filter for Pole Fed Window System. 20" Sediment Filter and 20" Carbon Block Filter (CTO)


Discount (Qty) :
2  -  2     Save  20% ea.
3  -  9     Save  30% ea.
10  -  49     Save  50% ea.
50  -  500     Save  60% ea.

In Stock

£14.34 inc-VAT

 


PRE FILTERS for Reverse Osmosis Water Fed Pole Pure Water Filter RO

ESSENTIAL TO BE CHANGED REGULARLY TO PROTECT YOUR REVERSE OSMOSIS MEMBRANES

 NEW 20"   Reverse Osmosis 1 SETS (TOTAL 2 FILTERS)

1x 20" 5 micron Sediment Filter

1x(CTO)Carbon Block Filter

Fits most 20” Water Fed Pole Window Cleaning & Fishkeeping Filter Systems including RO-MAN

20" 5 Micron Sediment Filter

Replacement particulate filter for 20" filter housing.
Polypropylene Filter for the removal of sand, silt, dirt other particles.
5 micron
Maximum temperature: 60 degrees Celsius
 Typically used in the right hand canister of the filter system.
 
 Block Carbon Filter (CTO)
The combination of the ultimate in plastics extrusion and activated carbon technologies has transformed the future of carbon filtration. By incorporating powder carbon and small mesh structures with extrusion manufacturing methods, clean, consistent and economic filters termed ‘CARBON BLOCK’ are created.  longer life, higher flow, no channeling, lower extractables, fine filtration, plus they are cleaner and more versatile. This is a 5 micron carbon block filter used for the removal of chlorine and certain heavy metals and contaminants.  They are particularly important for the removal of chlorine from water to protect your RO membranes
 
We recommend that these filters are changed 1-6 months depending on output capacity & actual use and water output.  The idea is to keep Chlorine off your membranes
 
This does depend upon the throughput of your RO System. Do not exceed these times or you may find that chlorine has oxidised your membranes requiring a complete replacement of reverse osmosis (RO) membranes. 
 
After fitting the filters, disconnect the pre-filter output from your RO housing and allow to flush approximately 5-10 minutes reconnect and start making water. This helps remove any particles from the new carbon filters and protects your membrane, if you get the small particles of carbon on your RO membrane is will cause the membrane to clog and results in early reduced flow rates. Please not it is quite normal for all new carbon filters to lose some carbon dust.
 
 These filters are made to NSF Standards and manufactured by ISO9001 company a member of WATER QUALITY ASSOCIATION OF AMERICAN.
Inc.VATShow Ex.VAT
 
Your Shopping Basket
No Items In Basket
Total : £0.00
Need some help?
Call 01507 524576
 

 
Easy Product Finder
Page displayed in:0.1875seconds.